Category: Mechanics

Ensuring Safety with Windshield Wipers

Most decisions made by drivers are based on a clear unobstructed view of the road ahead, which makes good visibility essential, especially during wet weather.

This means that windshield wiper blades are among the most important driving safety components on any motor vehicle.

Working windshield wipers are essential when driving during a rainWindshield wipers have a squeegee effect – each time the thin rubber blade moves across the windshield the droplets of water are pulled away from the driver’s field of vision.

Some wiper blades may look okay, but they do a poor job of wiping when put to the test. Others are in obvious need of replacement because they’re cracked, torn, split or show brittleness, or otherwise clearly showing signs of wear and tear.

Regardless of their appearance, if the windshield wipers are chattering, streaking or otherwise failing to wipe cleanly and consistently, the wiper blades should be replaced.

Replace Wiper Blades Regularly

Leading wiper blade manufacturers Trico and ACDelco both recommend windshield wiper blades should be restored every six months for maximum performance and good visibility when driving.

If left unchanged, all windshield wiper blade materials will eventually fall victim to environmental factors. Exposure to sunlight, ozone, and even atmospheric pollution causes the rubber to age, also if the wipers aren’t used much.

As for windshield wiper blades will wear out, flexibility can be an issue as they become old and getting them to clean effectively become a challenge. They may exhibit a continuous curvature, preventing it from achieving full contact with the windscreen.

This tends to be more of a problem on vehicles that are parked outside in the hot sun all day. The sun bakes and hardens the rubber, and when the wipers are needed, they streak and chatter because they can’t follow the curvature of the windscreen.

Heavy Use is Hard on Wiper Blades

Heavy use can be hard on wiper blades because dust, abrasives, and road grime wear away the edge that the blades need to wipe cleanly.

As the blade loses its edge (which is precision cut square to maximize the squeegee effect), water gets under the blade and remains on the glass. The result is reduced visibility and poor wiping action.

Any blade that’s chattering, streaking or doing a poor job of wiping, therefore, is a blade that’s overdue for replacement. The same goes for any blade that is cracked, torn, nicked or otherwise damaged.

A simple check is to try the windshield washers on a dry day. If the windshield wiper blades are not in a reliable state when they attempt to wipe the washer solvent off the glass streaking, chattering or any other problems will be plainly obvious.

Check the Windshield Washer System Too

This test also provides the opportunity to check how well the windshield washer system’s performing. Do both squirters work? If not, a nozzle may be plugged with dirt or a hose may be kinked or have come loose.

Check that the spray hits the windshield where it’s supposed to. If it doesn’t the nozzles need adjusting.

Also be sure the windshield washer pump delivers an adequate stream of solvent. If the stream is weak, the vehicle may have a weak washer pump, or a clogged, kinked or loose hose.

Most windshield washer reservoirs have a screen to filter out debris that could clog or damage the pump. If this screen itself is blocked by debris, it can choke off the flow of solvent to the washers.

After checking the windshield wipers, check the rear wiper too. After all, it’s just as important to see what’s behind when backing up in the rain as it is to see what’s up ahead.

Replacing windshield wiper blades isn’t difficult and almost anyone can make this a simple DIY project.

And remember, whenever a windshield wiper blade replacement is needed, always replace both blades at the same time even if only one appears to be worn.

The 5 Types Of Private Charter Planes You Can Choose


When people hear about private charter planes, they immediately think that these are only for the wealthy individuals. This is due to the expensive cost of buying or even renting out a private plane for charter. Although it will be more comfortable and convenient to ride one, most individuals typically complain about the cost. However, you do not need to be rich just to be able to experience flying in a private plane. All you need to do is organize a couple of friends in one group and split the rental cost. You will find out that you can enjoy the experience without having to break your bank. You just have to remember though that most private air jets have restrictions as to where they will be landing. They may not be able to land on certain airports that you wish to go to.

There are five different types of private charter planes that you and your companions can choose from if you decide to go with this experience. These classifications are typically based on three main factors. These are amenities, range, and size.

Light Jets

The first type is the light jet. A light jet has the capability of accommodating five up to eight passengers. This type of plane typically needs only one pilot for its operation. It is also considered as the lightest airplane among the other types. Private plane companies offer these light jets to cater to those people who will travel to destinations that do not have commercial airports with long runways. Although it does not have more space for other types, it is the most economical, especially if you only need to travel a short distance. It can travel up to 500 miles per hour and can go full two hours non-stop. Most light jets do not have lavatories, though, because the trips are only for short distances.

Turbo Prop Planes

A turboprop plane is considered as the smallest private aircraft among these types. This plane can accommodate about five to eight passengers, just like a light jet. However, it can go full four or five hours non-stop travel. It can also land in various environments, especially when leaving from New York City, whether it is snowing or even in the water. The company will only need to attach snow skis or amphibious floats to the bottom parts for such landings to become possible. When landing on solid ground, they can land on short and rough runways because of their great maneuverability and sturdiness.

Mid-Size Jets

From the name itself, the mid-size jets are slightly bigger than light jets and offer more interior or cabin space for you and your companions to move about. They also offer bigger space for your luggage. A mid-size jet is capable of accommodating six to eight passengers and can run up to seven hours full time non-stop. This type of jet is perfect for those families who are going on vacation, especially when visiting islands.

Super Mid-Size Jets

The next type is the super mid-size jet. They can carry about nine and even up to 12 passengers. This type of private charter plane can take off as well as land both in international and local airports. A mid-size jet also offers luxury and amenities on a smaller scale, such as optional entertainment and spacious cabin and galley, among others. It also has a high-altitude capability and high speed which makes it a very good option for transcontinental flights.

Large Cabin Jets or Heavy Jets

Lastly, you can also opt for a large cabin jet, or also known as a heavy jet. It can accommodate at least 10 passengers. It can also travel up to nine full hours non-stop. In most cases, this type of jet has several amenities such as full pull-out tabletops and even sleeping quarters for the comfort of the clients. You will also see flight attendants who will attend to your needs as well as the needs of your other companions.

For you to be able to choose the right type for you and your companions, you will have to determine how many members you will be in the group. It is important to know the number of passengers also to determine the type of jet you should go with. Aside from that, you also have to take your budget into special consideration.

What Mechanics Do To Diagnose Auto Issues

mechanic diagnosing car troublesWhen you are recommended to get a computer diagnosis for our automobile, you might think that there is seriously something wrong with your car. You might even start estimating in your head just how much it will cost you when the said diagnosis leads to serious repairs. However, computer diagnosis is not something a car owner should be overwhelmed with. It is just one of the common practices that mechanics take advantage of to identify problems, especially on microprocessor-controlled cars.

If you are given the recommendation of getting a computer diagnosis for your car, you shouldn’t be alarmed. Truth be told, the said diagnosis is a more efficient and cost-effective method for mechanics to diagnose car problems. Be sure though that the mechanic handling your repairs explain to you exactly what will be done to your car before you authorize any work. Computer diagnosis is just a generic term covering a wide range of automotive operations, after all.

Once you take the car for a diagnosis, the mechanic will raise the vehicle with mobile column lifts to see if there is any issues under the bed. The mechanic then uses a diagnostic tool to identify any recorded problems. This tool is a diagnostic software which accesses the automobile’s reporting and computer system. Through this software, the mechanic gets a report regarding the monitored problems and logged faults. By performing a car diagnostic test, a wide range of problems are revealed. These problems are usually associated with the vehicle’s oil tank, transmission, petrol tank, exhaust system, and various other car components.

With the majority of today’s cars, you can bet that there are already computer processors, sensors, and microchips installed in them. These tools can then be linked to the dealership’s or mechanic’s car diagnostic computer scanner. Diagnosing car problems are easier with these modern cars then.

Car diagnostics is certainly an extremely useful tool when it comes to diagnosing problems in a vehicle. It benefits the mechanic since the latter can easily identify the problem and repair them in the quickest way possible. Especially with the modern cars, the mechanic can obtain the generated fault codes stored in the car’s memory system. These faulty codes can tell the mechanic whether the problem is in the brakes, suspension, engine management, or the windscreen wipers.

Since the faulty codes in modern cars are detailed, the mechanic can quickly and accurately carry out repairs. Since it takes less time to do the repairs, owners can save on the cost. Moreover, since the problems are fixed while they are still in the early stages, owners can save big. The owner can also spare himself or herself from the stress of a broken car.

Some cars have an even more sophisticated software, though. For these cars, a mechanic can get details about ignition timing problems, fuel injector performance, vehicle engine issues, and even the firing of the ignition coils. It can also tell the mechanic detailed information about air and coolant temperatures, engine RPM levels, camshaft and crankshaft position, as well as the throttle opening. The details are helpful during the car repair.

A diagnostic test is an important tool for diagnosing auto issues. Moreover, it is not a tool that just anyone can use. Only certified mechanics can use the said tool properly and accurately. They know how to read the fault codes in car systems too.

It is not a far-fetched advice for homeowners to entrust their car problems to certified mechanics. They are the only one who can provide you accurate diagnosis regarding your car problems. Moreover, you can entrust the repair to them if any problems are requiring immediate attention. Your car is surely in good hands if you rely on the diagnostic tests carried out by a well-certified auto mechanic.